Skip to Content

Adjustable Screw-Type Truck Adaptors and Extensions Included!
67-EV1220 12,000 lbs. Lifting Capacity

Challenger Lifts Heavy-Duty EnviroLift Cassette Lifts

Increase your bottom line by servicing the profitable fleet market while eliminating any EPA concerns associated with traditional in-ground lifts . . . the revolutionary EnviroLifts™ are fully contained in a liquid resistant container, engineered to protect the environment from your equipment.

Engineered for heavier vehicles, such as dump trucks, ambulances, utility vehicles, wreckers, delivery vans, etc.


  • 12,000 and 15,000 lbs. capacity.
  • Maximizes the number of bays in your shop and generate more revenue potential (requires less shop space than surface mounted lifts).
  • Operates on only 12 quarts of oil or AFT oil.
  • Eliminate the risk of vehicle door damage (no columns or overhead obstructions).
  • Low-profile arms and superstructure for easy drive-over clearance.
  • 3" incremental air-actuated lock system . . . to raise vehicle at technician’s ideal working height to minimize fatigue and increase productivity.

67-EV1520 15,000 lbs. Heavy-Duty EnviroLift  $13,248

67-EV1220 12,000 lbs. Heavy-Duty EnviroLift  $10,669

Also Available

67-EV1020 10,000 lbs. EnviroLift with 3-Stage Arm Superstructure  $7,174

67-CSPK Universal Prekit for 67-AV1020, 67-EV1020, 67-EV1220 and 67-EV1520.  $2,837

Adaptor Accessories Included!

To accommodate a wide variety of vehicles, all Heavy-Duty EnviroLift models include adjustable screw-type truck adaptors and extensions are standard equipment. Standard equipment includes: Four adjustable screw type adaptors, four medium extensions and two high extensions.


67-SD100 Automatic Liquid Removal System $452  


MODEL 67-EV1220 67-EV1520
Rise height* 81" 84-1/4"
Stroke 68" 68"
Width overall 99" 71-1/2"
Drive-thru clearance 87" NA
Reach (arm minimum) 32" 26-1/4"
Reach (arm maximum) 49-1/4" 43"
Adj. adaptor height** 5-3/8 – 7" 6-1/2 – 8-1/4"
Adj. adaptor height** (with medium extensions) 8-3/8 – 10" 10-1/2 – 12-1/4"
Adj. adaptor height** (with high extensions) 11-3/8 – 13" 14-1/2 – 16-1/4"
Lifting capacity 12,000 lbs. 15,000 lbs.
Capacity (per arm) 3,000 lbs. 3,750 lbs.
Motor 2 hp 2 hp
Voltage (1 phase standard)*** 208 – 230 volt 208 – 230 volt
Speed of rise 65 seconds 80 seconds
Air required 75 – 125 p.s.i. 75 – 125 p.s.i.
Recommended ceiling height 82" plus height of tallest vehicle 85" plus height of tallest vehicle

*Rise height is measured with superstructure in highest position.

**Medium and high auxiliary adaptor extensions are standard.

***Optional 3 phase electrical also available; please specify at time of order.

NOTE: Shipping and handling charge of 3.2% will be added to all Challenger orders.

The Automotive Lift Institute (ALI) certifies that the 67-EV1220 and 67-EV1520 lifts described herein comply with the applicable provisions of the American National Standards ANSI/ALI ALCTV-2006 and are Third Party Validated by the ETL Testing Laboratory.